Portable Home/Hospital Use Compressor Nebulizer
Product Name: Compressor Nebulizer
Model: YS-01
Lifetime: 1000 hours
Note:
When stored at temperature below 5 ºC(41ºF), should be placed in the normal operating
temperature more than 4 hours before using the device. Do not use the device where
the device may be exposed to flammable gas, explosive or mixed narcotic gas
environment.
SUPPLEMENTARY INSTRUCTIONS:
a. Classified by anti-shock: Class II
b. Classified by anti-shock: Type B application
c. Classified by the protection level of the input fluid: General equipment
d. Classified by the safety level of operating under conditions of flammable anesthetic
gas mixed with air or flammable narcotic gas mixed with oxygen or nitrous oxide:
Non-AP/APG type
e. Operation mode: Continuous operation
f. Without signal transfer part
g. Working system: Constant working system
h. No application part for protection of defibrillation
i. Non-permanent installatio
Power AC220V ± 22V, 50HZ ± 1HZ
Power Consumption 160 VA
Average Nebulization Rate ≥0.2 mL/min
Noise level ≤ 65 dB
Particle size 2μm-20μm
Net Weight 1.35 kg
Fuse 5X20mm F2AL 250V
Operating temperature range 5ºC~40ºC (41ºF~104ºF)
Operating humidity range 5%~80%
Atmospheric pressure 86kpa~106kpa
Product components:
Compressor
Nebulizer kit
Air tube
Mouth piece(optional)
Adult/Child Mask(optional)
YS-01 Compressor Nebulizer System is intended to provide air to the pneumatic
nebulizer in order to aerosolize medications for inhalation by the patient for respiratory
disorders. The system is designed for use with pediatric (defined by the prescribed
medication) and adult patients at home, in the hospital, and sub-acute settings.
IMPORTANT INFORMATION AND SAFEGUARDS:
To ensure the correct use of the product, basic safety measures should always be
followed including the warnings and cautions listed in this instruction manual.
CAUTIONS: Risk of Electrical Shock and some other possible damage
1.Unplug the AC adapter from the electrical outlet after using the device.
2.Do not use or store the device in humid locations, such as a bathroom. Prohibit use
the device while taking a shower.
3.Do not store the device nearby the bathtub.
4.Do not immerse the device in water or other liquid.
5.If the device drops into the water or liquid spills on it, immediately unplug the AC
adapter and wipe off the liquid with gauze or other soft absorbent material.
6.Unplug the AC adapter when leaving home.
7.Provide close supervision when this device is used by, on, or near infants, children
or compromised individuals.
8.Use only with the authorized parts and accessories. Do not use the parts and
accessories which are not recommended by manufacturer.
9.Do not operate the device with damaged power cord or plug
2
II.PRODUCT DESCRIPTIO
III.INTEND USE10.Do not operate the device if the product is dropped or damaged.
11.Keep the AC adapter away from the overheated shell.
12.Do not use the device while sleeping or if drowsy.
13.Do not inlet any object into the tube and the main unit.
14.Do not use a cellular phone or any other electronic devices near the device. It may
result in an operational failure. Please use them separately.
ATTENTIONS:
1.To ensure the correct use of the product, please follow the instruction manual.
2.Make sure the air inlet filter is dry before use. If the filter is damp, please change it
first.
3.Clean and disinfect the nebulizer kit regarding the indicates.
4.To avoid the risk of electronic shock and the damage on the compressor, the device
only can be worked at the indicated power supply.
5.In high humidity environment, may cause water drops inside the tube. If this kind of
situation occurs, can dry it through connecting the tube only and operating the compressor.
6.It is necessary cut off the power supply when adding the medication, should not be
over added.
7.Please contact the manufacturer or local supplier if need to change the power cord
or plug.
8.It is normal that may cause heat the shell and the output connector when using the
device.
9.Caring the device in the best condition regarding the instruction. If need to change,
install the new component directly at the next time when you use it.
WARNING:
For type, dose, and regime of medication, follow the instructions of your physician pr
licensed healthcare practitioner.
OPERATING THE DEVICE:
1.Wash your hand before using the device.
2.Twist the air tube plug slightly and push it firmly into the air tube connector on the
compressor.
3.Put the disassembly plug on the medicine cup (baffle) into the cup, add the prescribed
amount of medicine, hold stably the cup and assembly it to the protective cover.
34.Insert the mouthpiece and the "T" cup (if have) to the up side of the protective
cover of the atomizing cup. If using the mask, attach the mask to the inhalation top.
5.Twist the air tube plug slightly and push it firmly into the air tube connector on the
button of the nebulizer kit.
6.Press the"-" button to generate compressor.
7.Place the mouthpiece into mouth and close the mouth, breath through the mouthpiece
deeply and slowly to make sure the medication function efficiently. If necessary,
press the "o" button to stop the device.
8.If using with mask, place the mask over the nose and mouth, pull the elastic strap
over head. Inhale the medication and exhale normally through the mask.
9.After medication, press "o" button to turn off the device and unplug the AC
adapter from the electric outlet.
Audited Supplier 
){kind=link}